r/300zx • u/ImaginaryPiece3528 • 8d ago

Timing

Is this an acceptable tolerance? Trying to tim my engine and its my first time.

28 Upvotes

98% Upvoted

11 comments sorted by

View all comments

8

u/JayVincent6000 8d ago

this video is a good guide: https://www.youtube.com/watch?v=qhhTF_2F9Yk and this wiki: https://conceptzperformance.com/wiki/index.php/Timing_Belt_Service has pics

if you want to be 100% certain, count belt teeth between each mark. The dimples on the backing plates are approximate, what's important is the line on the belt matches exactly with the dimple on the gears. Lastly, rotate the crankshaft with a breaker bar and socket through 720 degrees (all the way around twice) to ensure no valves are hitting the pistons (note this is easier to do by hand if you have pulled the spark plugs first since you will not have to fight cylinder compression)

good luck!

2

u/ImaginaryPiece3528 8d ago

Appreciate it just unsure of the half a tooth off. But myteeth count is correct so far

1

u/HydroPowerEng 7d ago

Are your marks the old belt or the new one? If it is the old belt, being off is from belt stretch.