r/pcgamingtechsupport • u/Intelligent_Milk_350 • 9d ago
Troubleshooting No input to monitors
I recently had a power outage and after rebooting my PC both of my monitors are not receiving input. I'm thinking the PSU is the issue but having trouble confirming. I've pulled the 24 pin and tested with a jumper. All the voltages look good. The only issue I can see visually is one of the pins on that cable is slightly melted and recessed but still shows proper voltage. Is it enough to cause the issue is my main question? I've tried multiple monitors and cables, did a hard reboot, and changed the motherboard battery. The graphics is on board so no way to test that separately that I know of.
The picture shows "pin 10" slightly melted but see no other visual issues other than that. Any input appreciated before I start dishing out money. Lol
1
u/AutoModerator 9d ago
Hi, thanks for posting on r/pcgamingtechsupport.
Please read the rules.
Your post has been approved.
For maximum efficiency, please double check that you used the appropriate flair. At a bare minimum you *NEED** to include the specifications and/or model number*
You can also check this post for more infos.
Please make your post as detailed and understandable as you can.
I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.