r/Pottery • u/Single-Fee-1708 • 8d ago

Question! Trimming question

Post image

This has recently started to happen to me while trimming, and at first I thought the problem was that I was not pushing hard enough or the wheel was too slow (which usually fixes this problem for me), but my usual fixes did not work. I managed to get it pretty even eventually by slowing the wheel down, but how can I avoid this from happening at all?

23 Upvotes

93% Upvoted

24 comments sorted by

View all comments

58

u/rayfound 8d ago

this is from using a wide trimming tool before the pot is turned round on center, causing the tool and your arm to oscillate with the pot.

I like to start with a very fine point initially and just take the high spots (it shouldn't make contact all the way around pot initially), with a very rigid hand.

once uniform round on center, I can change to trimming for shape with tools of varying width.

15

u/thnk_more 8d ago

yes. and they really really need brace their arms so they don’t bounce.